| MPN | SKU | Question | Answer |
| WOBHT24 | 122992 | What is the material of this item? | This is high quality steel. |
| WOBHT24 | 122992 | What is the thickness of this item? | 3/8" inch thick |
| WOBHT24 | 122992 | How wide is the weld plate? | The weld plate is 5" x 19 1/4" |
| WOBHT24 | 122992 | How wide are the tines? | 6" |
| WOBHT24 | 122992 | What are the dimensions between the steel plates? | 6" outside to outside. 5" inside of Jaw |
| WOBHT24 | 122992 | How close to the bucket do I want to weld the weld plate? | When you curl your bucket to a 90° angle, you want the tip of the jaw to touch the tip of the bucket tooth, then you will have the location to weld the mounting bracket. |
| WOBHT24 | 122992 | What diameter are the pins? | 1 1/4" |
| BHBUCKET24v1b | 122926 | How thick are the side walls? | 1/4" |
| TOROFHB10 | 123112 | What is the total length of the bucket from the back to the teeth? | 20.5" |
| TOROFHB12 | 123113 | What is the total width of the bucket? | 5 3/8" |
| KDBHT24 | 122995 | What is the width from outside to outside? | 6" w x 19" L |
| BOBHT25X | 122991 | What is the size of the fitting of the male and female part on the hoses for this item? | 1/4 inch British Standard to 1/2 inch |
| BOBHT25X | 122991 | What is the gpm required to operate? | 11-15GPM minimum |
| FRONTHOE-BHBUCKET14 | 123104 | What is the Grease Zerk dimension? | Grease Zerk - M10X1 |
| FRONTHOEv2 | 123120 | What kind of hydraulic connections are needed to match up on the skidsteer side? | The Fronthoe was designed to work with our Bolt-On Thumb. The Hydraulic Thumbs we offer are not compatible without modification to the Thumb & Fronthoe boom. |
| FRONTHOEv2 | 123120 | What kind of hydraulic connections are needed to match up on the skidsteer side? | No |
Comments
Please sign in to leave a comment.