| MPN | SKU | Question | Answer |
| FM60v1b | 191657 | What are the dimensions for the blades? | 20.5" L x 2.5" W x 1/4" T. 1/2" Hole |
| FM60v1b | 191657 | What size or model # blades are used on the FM5? | 20" Hardened Steel Blades-Medium lift style |
| FM60v1b | 191657 | What kind of belts does the item use? | B1880 V-Belt. |
| FM60v1b | 191657 | What's the size of the belt for this item? | 17mm x 11mm |
| FM60v1b | 191657 | What is the center hole size in the blade? | 1/2" |
| FM72v1b | 191658 | What are the dimensions for the blades? | 20.5" L x 2.5" W x 1/4" T. 1/2" Hole |
| 155FLAIL | 191522 | Can this item mow in reverse? | Yes, you can mow in reverse. |
| 155FLAIL | 191522 | What is the size of the shear bolt? | M8*50mm |
| 155FLAIL | 191522 | What is the grade of the shear bolt? | The bolts are grade 2 but I would not recommend going over grade 5. |
| 155FLAIL | 191522 | What is the drive belt size? | 17x940 |
| 155FLAIL | 191522 | Is there a shear bolt on the Flail Mower? | The only Shear Bolt is located on the PTO Shaft. |
| 155FLAIL | 191522 | How far offset to the right is the 3 pt Hitch Mount? | 35 1/4" |
| 155FLAIL | 191522 | Can a John Deere 317 G fit the 60" Flail mower? | Yes. |
| 155FLAIL | 191522 | What are the hammer size for this item? | The replacement Hammers are 3.5" wide. |
| 155FLAIL | 191522 | Does the mower have height settings? | The cutting height can be adjusted from 0"- 6". |
| 175FLAIL | 191523 | Does the 68" flail mower have a manual side to side adjustment? | The only way to manualy shift the mower is to unbolt the A-Frame and shift it over to the other bracket. |
| 185FLAIL | 191524 | What size are the belts? | 17x991 LI V-Belt |
| 185FLAIL | 191524 | What size wrench is needed to get the #2 plug removed from the item? | 16mm |
| 155FLAILSHFT | 191528 | What size are the hydraulic hose connectors? | 1/2" |
| 185FLAILSHFT | 191529 | What size are the hydraulic hose connectors? | 1/2″ NPT Thread fittings |
| 185FLAILSHFT | 191529 | How many hammer blades are on this mower? | 28 Hammers. |
| 200FLAILDB | 191525 | How does the flail mower pivot? | The Mower pivots with the use of the Tractors Rear Remotes. |
| 200FLAILDB | 191525 | Can this be used to pull directly behind the tractor. in addition to the offset? | Yes, if you choose to pull the the Mower behind the Tractor, you can do this by actuating the hydraulic cylinders to bring the Mower to the rear of the Tractor. |
| 200FLAILDB | 191525 | How many hammers are on this mower? | 20 |
| 200FLAILDB | 191525 | How many stations on the rotor? | 20 stations |
| 155SKIDFLAILv1b | 191677 | How many gear boxes are there? | 1-Gear |
| 155SKIDFLAILv1b | 191677 | How many lubrication points are there? | 4-Grease Zerks |
| 155SKIDFLAILv1b | 191677 | How much gear oil is needed? | 1.2L of 85/140 is needed |
| 175SKIDFLAILv1b | 191678 | Does the skid steer solely run off the hydraulics or does it need additional oil? | The Hydraulic Motor runs off the Skid Steer Hydraulics |
| 175SKIDFLAILv1b | 191678 | How much gear oil is required for the gearbox? | The Gearbox should be filled with 1 liter of SAE 90 Gear Oil. |
| 3PTTRIM-TRIMCORDKIT | 191411 | What is the minimum height of bottom fence wire? | 1.5" |
| 3PTTRIM-TRIMCORDKIT | 191411 | What is the distance from the PTO shaft to the edge of the cutter to determine the reach? | 57" |
| 3PTTRIM-TRIMCORDKIT | 191411 | How far does the trimmer pivot? | The Trimmer is able to pivot 16 degrees in either direction. The customer can also adjust the cutting height by removing the 1/2" spacers if they need more of an angle. |
| 3PTTRIM-TRIMCORDKIT | 191411 | What size line do I need to buy ? | We recommend using .175mil Line but it can accept up to .225mil by adjusting the Trimmer cord head. |
| 3PTTRIM-TRIMCORDKIT | 191411 | How many inches deflect the arm? | The Trimmer will pivot 20° Up and Down. |
| 155FLAILSHFT | 191528 | What are the lowest heights for the hydraulic side shift flail mowers? | 0-in to 4-in cutting height |
| 155FLAILSHFT | 191528 | What is the max heights for the hydraulic side shift flail mowers? | The max height is 4" |
Comments
Please sign in to leave a comment.