| MPN | SKU | Question | Answer |
| TERRAMNSTR | 114230 | What is the thickness of the material used for the 84 teeth? | 1/4" thick teeth |
| 3PTQTAv1b | 136211 | What is the distance from the top hook area to where the connection pin? | Top link to lift pin 19". |
| 3PTQTAv1b | 136211 | How far down does the connection pins drop? | Lift Pin spread 26 |
| 3PTQTAv1b | 136211 | What is the distance between the connection pins? | Quick Tach pin center to center 29 3/8". |
| 72ROCK | 115002 | What is the grade of steel? | 1/2" Grade 50 |
| 72HDDIRTv2 | 114258 | What is the length from the back of the bucket to the tip of the teeth? | 35 53/64" |
| UABHA+BHP | 180995 | What is the measurement of center to center of the pins? | 9" center to center. |
| UABHA+BHP | 180995 | What is the clearance of the top pin. | 7" clearence |
| SSTILTv3 | 114246 | What is the weight capacity? | 4000 lbs. |
| SSTILTv3 | 114246 | How is the tilt angle set? | The tilt angle is adjusted by the tractor. |
| SSTILTv3 | 114246 | What is the hydraulic hose length and coupler? | Hoses-66". 1/2" NPT Flat Faced Couplers |
| SSTILTv3 | 114246 | What size is the tilt cylinder? | 2.5" x 1.25" x 6" stroke |
| QTK-SCBK | 136302 | What is the weight capacity? | 3500 pounds |
| QTA | 136200 | What is the metal thickness of this quick attach? | Unfortunately we do not have this information; it is A36 steel however. |
| QTA | 136200 | What is the measurement of where the pins are located from the outside edges? | 34" pin to pin. 44" Outside to Outside |
| QTA | 136200 | What is the threading specs for the bolts? | 1.25 |
| QTA | 136200 | Will the QTA fit the 316MP? | Yes it will fit. All our Mount Plates are designed to be compatible with our Quick Attach Adapters |
| QTK-SCBK | 136302 | What is the thickness of plate? | 1/4" |
| QTK-SCBK | 136302 | Are there different sizes available? | No, that is the only size we carry. |
| GQTA | 13400 | What is the lifting capacity of this attachment? | 3500 pounds |
| HDSTGRAP | 124111 | How wide does the grapple open when in use? | The Grapple Jaw opens to 90°. A little over 45" |
| HDSTGRAP | 124111 | What are the size for the hydraulic hoses? | 1/4-19 BSP |
| 72GRADER | 191421 | Can the blades be removed to replace? | Yes,the blades can also be flipped once one side is worn down to extend the life of the cutting edge. |
| 84GRADER | 191422 | How deep does the blade cut? | Full down pressure 2.5" |
| 84GRADER | 191422 | How far below skid does blades hang? | Cutting Edge extends 2" below the attachment. |
| 84GRADER | 191422 | Can this be adjusted to create a crown on road? | The Blades are made from harden steel so they can not be adjusted. |
| JDMP | 166100 | What is the weight capacity? | 3500 pounds |
| JD3PTMP | 169210 | What is the dimension of the top link? | 10 5/16" Long x 2 3/64" Wide x 5/8" thick. |
Comments
Please sign in to leave a comment.