| MPN | SKU | Question | Answer |
| LSWX410 | 198341 | Is this wood splitter inverted? | Yes. |
| LSWX410 | 198341 | What is the required hydraulic flow rate? | 10–16 GPM. |
| LSWX410 | 198341 | What replacement parts are needed for leaking fittings? | Parts 10 and 11. |
| LSWX410 | 198341 | What is the splitting wedge height? | 8.5" tall. Custom wedge sizes are not available. |
| SSTRUSSBOOM | 194109 | What type of hydraulic couplers are used? | 1/2" flat-face couplers. |
| SSTRUSSBOOM | 194109 | What is the total extended length? | 313" extended length, not including the skid steer. |
| UABOOM | 197111 | Is it compatible with a quick hitch? | Fits quick hitches with 30-1/2" center-to-center lift pin spacing. |
| SSQARLS | 198342 | What are the hydraulic cylinder specifications? | 22-ton cylinder, 3,000 PSI, 4" bore, 24" stroke. |
| SSQARLS | 198342 | What is the height from the splitter base to the pivot bracket? | 18". |
| SSQARLS | 198342 | Does it have an auto-return valve? | No. The return must be initiated manually, after which the cylinder automatically returns to neutral. |
| SSQARLS | 198342 | What is the minimum hydraulic flow requirement? | 10 GPM minimum. |
| SSQARLS | 198342 | What are the wedge dimensions? | 7-3/4" x 7-3/4". Cylinder stroke is 24". |
| TMBRTRLR-TMBRCRN | 332105 | What is the steel thickness? | 12-gauge steel. |
| JDTS005v2 | 198107 | What are the hydraulic flow requirements? | 12.5–31.5 GPM. |
| TTP13 | 198110 | Are the pivot points bolts or grease fittings? | Pins without grease fittings. |
| TTP13 | 198110 | How long is the hydraulic hose? | 72". |
| TTP13 | 198110 | Is the attachment greaseable? | No, it does not include grease zerks. |
| TTP13 | 198110 | What is the metal thickness at the pivot and plate? | 3/8" pivot area and 5/16" plate thickness. |
| TTP13 | 198110 | What size is the adapter fitting? | 3/8" JIC. |
| TTP13 | 198110 | Will the hydraulic hoses reach rear remote ports when mounted to a 3-point hitch? | Yes. |
| TS005 | 198105 | What hose fittings are used? | 1/2" NPT fittings. |
| TS005 | 198105 | Is it compatible with a Kubota SVL75? | Yes. |
| TS005 | 198105 | What is the weight of the shear blade and attachment? | Shear blade: 55 lbs. Complete attachment: 950 lbs. |
| TS005 | 198105 | What is the minimum hydraulic flow requirement? | 10 GPM minimum. |
| TS005 | 198105 | What seal kit sizes are used? | O-ring: 50×58×10 mm; Dust Seal: 50×59×6/11 mm; Glyd Ring: 80×6 mm (2 pcs); Step Seal: 50×6 mm; Wear Ring: 12×2.5 mm (2 pcs); Fluororubber Seal: 75×4 mm (2 pcs). |
| WCBX42S | 198242 | What is used as a shear pin on my BX42 chipper? | It's a shear bolt. |
| WCBX42S | 198242 | What size and grade are replacement shear bolts? Where can I find a parts list? | M10 x 1.5 x 55; recommend Grade 5 or lower. |
| WCBX42S | 198242 | Length of the PTO shaft with the BX42 Chipper | 32.8" collapsed, 43.8" extended. |
| WCBX42S | 198242 | What are the dimensions of the 3-point hookup? | 30" x 15". |
| WCBX42S | 198242 | What is the proper size and grade shear bolt for the Titan BX42 chipper? | M8 x 50 mm, Grade 8.8. |
| WCBX42S | 198242 | What is the recommended gap between stationary and rotary blades? | 1/32". |
| WCBX42S | 198242 | Will it work on my Kubota BX2380? | Yes. |
| WCBX42S | 198242 | Which wood chipper should I get for a John Deere 3033R? | Based on PTO HP rating, the BX42 is recommended. |
| WCBX42S | 198242 | What size and grade backup shear pins should I get? | M10 x 1.5 x 55; Grade 5 or lower. |
| WCBX42S | 198242 | Will the BX42 work with a John Deere 4115? | Yes, it should run the attachment fine. |
| WCBX42S | 198242 | What paint color matches the chipper? | Closest color code is RAL 3020. |
| WCBX42S | 198242 | What replacement shear bolt should I use? | M10 x 55 mm, Grade 2–5 recommended. |
| WCBX42S | 198242 | Chute assembly does not align properly. Should washers be used? | Chute sits on 2 spacer rings and 2 hood capture plates; washers are not required. |
| WCBX42S | 198242 | What is the distance between the pins? | 30" x 15". |
| WCBX62S | 198242 | What grade shear bolt is normally used? | Grade 5 (8.8 / 3 lines) or Grade 8 (10.9 / 6 lines). |
| LS3724_L | 198372 | What is the retract and extend time? | Extend: 7.7 sec; Retract: 6.5 sec. |
| LS3724_L | 198372 | Does this splitter come with a 4-way wedge? | Yes. |
| LS3724_L | 198372 | Splitter is difficult to start in cold weather. Any suggestions? | Recommend using ether to assist starting in very cold conditions. |
| LS3730 | 198371 | Looking for a replacement adapter between cylinder and valve. | Contact Parts Department if purchased and outside warranty. |
| LS3730 | 198371 | What is the maximum log diameter? | 26". |
| LS3730 | 198371 | Does it come with a 4-way wedge, battery, and oils? | Includes 4-way wedge and battery; does not include fluid. |
| LS3730 | 198371 | Ram auto-return is not working. | Refer to page 15 of the manual: http://titanmanuals.com/pdfs/LS37.pdf |
| LSWX310 | 198331 | Minimum GPM required? | 16 GPM minimum. |
| LS3730 | 198371 | What is the GPM requirement for the 37 Ton 420cc Horizontal Log Splitter? | 22 GPM. |
Comments
Please sign in to leave a comment.