| MPN | SKU | Question | Answer |
| SP200 | 170302 | What are the specifications on the couplers? | The website states that standard Flat Faced Couplers are used. The size would be 1/2". |
| SP200 | 170302 | Can this used for ploawing snow? | Yes, the Dozer Blade can be used as a Snow Plow |
| SP200 | 170302 | What are the horsepower requirements for a hydrostat drive utility tractor to operate your 79" Skid Steer? | The minimum requirements are between 25-35hp. The customer would need a 3rd function valve equipped to actuate the blade. |
| SP200 | 170302 | What size thread is the cylinder? | 1/2" NPT |
| SP200 | 170302 | Does the blade lock for dozing? | Once the Hydraulics are connected, the blade will stay in the posistion it is adjusted to via controls. |
| SP200 | 170302 | Does this blade come with a had rubber bottom? | Yes, the "Cutting Edge" of the blade is very hard dense rubber |
| SP200 | 170302 | What is the angle the dozer will go up and down? | The Blade is only able to adjust 30° left and right. The up and down function is adjusted with the Tractor/Skid Steers Bucket curl feature |
| SP240v1b | 170321 | What is the tilt angle up and down? | The blade is a single cylinder operation which means it will only tilt left and right, not up and down. The up and down tilt action will be from the loader or skid steer hydraulic cylinders. |
| SP240v1b | 170321 | What size male and female end for the hydraulic hoses? | The Hydraulic hoses are equipped with 1/2" Flat Face couplers (1/2" NPT threading) |
| SP8-P170200-4 | 170102 | Is this snow pusher strong enough to handle 80hp and 5 ton? | Yes the pusher is rated for tractors 45+ HP. The pusher has a weight capacity of 4,000 lbs. 7 yrds |
| TOROSNOW | 170303 | Will it fit my Kubota BX1800? | The attachment will not fit. They are designed to fit Mini Skid Steers and the customers loader looks like a Pin-On design. |
Comments
Please sign in to leave a comment.